Industrial Chemicals

Aspartame Powder

We deal in a wide range of products in the food and feed industry that can be summarized into the following main categories: Amino acids , Antioxidants,  Emulsifiers, Energy Drink Ingredients, Food coloring Preservatives, Acidifiers, Sweeteners, Thickeners, Vitamins

HDPE

High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching.

Alcohol Sanitizer Detergent Raw Material Sodium Lauryl Ether Sulphate SLES 70%

It is widely used in liquid detergent, such as hair and bath shampoo, dish detergents, bubble bath and hand washing, complex soap etc. SLES can also be used in washing powder and detergent for heavy dirty. Using SLES to replace LABSA, phosphate can be saved or reduced, and general dosage of active matter is reduced.

White/Yellow Petroleum Jelly (Vaseline)

Petroleum Jelly is a mixture of mineral oils, paraffin and microcrystalline waxes that, when blended together; Create something remarkable- a smooth jelly that has a melting point just above body temperature. The result – it literally melts into skin, flowing into the spaces between cells and the gaps in our lipid barrier. Once there, it re-solidifies, locking itself in place.

Alkyd Resin

Long oil alkyd resins are those that have an oil content greater than 55%, something that helps give a smooth brushing action. Long oil alkyd resins are soluble in aliphatic type solvents (white spirit):Also with proper usage of additives and processing techniques it can be made water thinnable as well.

Sodium Saccharin 8-12 Mesh

Sodium saccharin is a white, odorless, and intensely sweet granular or crystalline powder. It is primarily an artificial sweetener and approximately 500 times as sweet as sucrose (regular sugar). Sodium saccharin is most commonly used as a food additive to sweeten products such as candies, vitamins, salad dressings, gum, table sweeteners, jam, canned fruit, drinks, medicines, toothpaste and much more.

Wax Microcrystalline White

The elastic and adhesive characteristics of microcrystalline waxes are related to the non-straight chain components which they contain. Typical micro crystalline wax crystal structure is small and thin, making them more flexible than paraffin wax. We commonly use in cosmetic formulations.

Titanium Dioxide Rutile R-214 TiO2 Titanium Dioxide Rutile Grade

Special Features: Excellent whiteness, Good Weatherability, Excellent opacity and gloss, and Quickly dispersed. APPLICATIONS: They are formulated and applicable to Interior Coatings, Exterior coatings, Printing ink, Plastics, Rubber, Adhesives, Paper making, Cosmetics

White Spirit

White spirit is super useful. It’s the painter’s pal and the machinist’s mate. But it’s not always easy to see the back of. Not only does it have a full-on all-pervading whiff (a nose assault a bit like that of paraffin), it’s on the list of things you shouldn’t pour down the sink.

Toluene DiisocyanateT-80

Property: TDI is belongs to isocyanate products, use in producing polyurethane elastomers, top grade polyurethane coating and other industries. It is isocyanate ester product, can replaced all or part of the T80 ,polyester-based soft foam, high-bearing sponges, semi-rigid ester foam, high resilience, slow rebound , paint and other industries.

Usage: TDI is an aromatic isocyanate, a precursor to Polyurethanes (PU) that mostly used for making flexible foams. It is produced for reaction with polyols to form polyurethanes.